Discover parametric 3D models from the Orca community, explore DIY-ready designs, and find ideas you can build on.
A pegboard desk shelf: a pegboard panel held between two side walls with a shelf surface on top. The...
A tall bookshelf: multiple horizontal shelf levels supported between two upright frames, with all pa...
The original wave-walled vase that the later named variants (dune / petal / ripple / scallop / bloss...
The baseline vase: a simple curving silhouette with walls thin enough to print fast yet thick enough...
A tall gourd-shaped vase: two bulges separated by a waist, like a stretched calabash. The waist visu...
A compact rectangular stool with a small footprint — fits under desks, by doorways, and into narrow ...
A stool with tapered legs — thicker where they meet the seat, thinner at the floor. The taper places...
A small side table: rectangular top on four straight legs joined through mortise-and-tenon at the to...
A plain four-leg stool: square seat panel, four straight legs joined to the seat via mortise-and-ten...
Bar-height hex stool: same six-sided seat as the standard hex, raised to counter height with proport...
A five-legged stool with a pentagonal seat — one leg per corner. Odd leg counts are a classic trick ...
The baseline pen holder: a single cylindrical printed cup. Used as the reference geometry against wh...
A round pen holder printed in one piece with horizontal ribs around the body. The ribs give a tactil...
A wallet-format comb cut from acrylic with the proportions of a credit card. Same flat-stock idea as...
A handleless comb — the spine of the comb itself serves as the grip surface, like a barber's fine-to...
An over-the-door hook organizer: a one-piece CNC-machined steel body with ten hooks arranged along a...
A slatted chair with two distinct backrest bands — upper band at shoulder height, lower band at lumb...
A ladder-back chair: the two rear posts run tall — past the seat plane — and carry a row of horizont...
A freestanding coat rack: four uprights forming a tall column, joined by bottom and top rails and an...
A flat-pack storage box where each side wall carries a hand-shaped cutout that serves as a built-in ...
A curved-back chair built as a stack of CNC-milled profile panels glued face-to-face, like a laminat...
A vase with vertical fluting — tall narrow channels running top to bottom around the body, like the ...
A solid workbench: a thick slat top nailed onto a heavy four-leg frame, with the slats running acros...
An amphora-style vase — wide shoulders that taper into a small neck and base, echoing the classical ...
A teardrop-profile vase — widest near the bottom, tapering smoothly to a small lip. Center of gravit...
A round-seat stool with four straight legs and a low stretcher ring — the household standard form. R...
A wide-base splayed stool with an exaggerated leg flare — floor footprint significantly wider than t...
A low coffee table with a separate lower shelf — six CNC parts. The shelf doubles the usable surface...
A round-seat bar stool at counter height with four slightly splayed legs and a ring of stretchers be...
A stool with legs inset from the seat edge instead of flush — the seat overhangs visibly on all four...
A freestanding hexagonal pegboard: the same hex panel slotted into a wood base so it stands on a des...
A two-compartment pen caddy built from flat printed panels glued together: a base, four walls, and a...
A tri-cluster pen holder: three small cup volumes fused into one printed body, sharing walls. Three ...
A two-part comb: a flat printed comb head and a separate handle frame that snaps over it via frictio...
A chair built around its joinery: every rail, slat, and leg passes through a notch cut into the next...
A standard rectangular pegboard — a CNC-milled timber panel with a regular grid of holes for hooks, ...
A kid-scaled slat chair: seat height around 280 mm, narrower seat slats, shorter backrest — proporti...
A chair with a deliberately lowered front seat edge — the seat tilts gently back, opening up the hip...
A pocket-sized comb cut from a single sheet of acrylic at credit-card thickness — fits flat in a wal...
An open-topped crate — four flat walls glued to a base. The simplest possible bin form, which makes ...
A timber TV stand with a slatted top that supports the TV across multiple stiff bars rather than a s...
A vase whose outer wall is sculpted into a continuous ring of soft petal lobes — softer than the blo...
A small wall-friendly towel rack: low-profile timber frame with two horizontal bars across which tow...
A short bell-shaped vase — wide flared mouth, short body. Sized for bushy short-stemmed arrangements...
A classical urn shape: rounded body, distinct shoulder line, modest neck, flared lip. Reads more cer...
A three-legged round stool: three legs spaced 120° around the seat, joined by two diagonal stretcher...
A storage bin partitioned by two full-height internal dividers, splitting the volume into three side...
A pedestal side table: round top mounted on a single central post with a cross-shaped foot at the bo...
A stool reinforced by a box-frame stretcher: four stretchers form a closed rectangle around the lowe...
A low round stool — about footrest height (~250 mm) — meant as an auxiliary seat, plant stand, or ki...
A pegboard variant using vertical slots instead of round holes. Slots let hooks slide laterally to a...
A glued square pen holder with one wall lowered to a scoop profile — the front wall dips down, so a ...
A square pen holder cut from CNC-milled timber — panels slot together via tabs, and a top frame caps...
A six-seat dining table with a wide top made from twenty parallel slats nailed onto a frame of four ...
An aluminum laptop stand: two CNC side frames joined by an upper support rod and a pair of base rods...
A circular pegboard — same hole grid as the standard rectangular panel but bounded by a circle. The ...
A backless slat stool: row of seat slats on a four-leg frame, with cross stretchers between the legs...
A chair with a backrest split vertically into two slats with a gap between, leaving the spine's cent...
An outdoor garden bench built around a row of timber slats stretched between two end frames. The sla...
A business-card holder printed as one piece — a slim trough sized for a stack of standard cards with...
A bar-height tripod stool: three legs at counter height with cross stretchers. The three-leg geometr...
A vase rippling with horizontal bands — tight regular waves that look like still water disturbed by ...
A dual-compartment waste bin: one full-height divider down the middle splits the volume so paper and...
A round-bellied bottle vase with a deliberately narrow neck — long stems are funneled into one uprig...
A vase whose outer wall is sculpted into a ring of overlapping blossom-petal scallops. Each petal ca...
A round-seat stool with deliberately splayed legs — each leg angles outward, so the floor footprint ...
A storage bin with elongated handle slots cut into the front and back walls. The slots are tall enou...
A toothbrush holder — a single printed body with several wells deep enough to hold brushes upright. ...
A stool stiffened by an X-shaped cross brace under the seat — just two stretchers crossing — giving ...
A stool with an octagonal seat — visually close to round but with straight edges that are easier to ...
A rectangular pegboard with a base — the same standard pegboard, but standing upright on a desk inst...
A glued pen holder with a large rectangular cutout window in the front wall — shows the contents at ...
Like the square-frame holder, but with a scoop cut into the front panel — same single-pen ergonomic ...
A pen holder with vertical fluting around the body — tall narrow grooves that read like classical co...
A folding wooden laptop stand: a main cradle body with two support inserts that drop through blind m...
A framed pegboard — the perforated face is recessed inside a raised wood frame, like a picture in it...
A slatted chair with one continuous wide backrest band — broader than the standard chair's backrest ...
A chair with a full ring of stretchers at low height — one between each adjacent pair of legs. The c...
A low outdoor bench in CNC-milled timber, designed for genkan-style entries and balconies where seat...
A plank dining chair reduced to its essentials: a single wide seat panel, four straight legs, and on...
The square-seat counterpart to the round bar stool — same height and stretcher pattern but with a fl...
A vase with clear scallop-shell ribbing — well-defined repeating arcs running from top to bottom. Ea...
A plain rectangular waste bin, printed as one continuous body — walls and floor extrude together for...
A slim bud vase, tall and narrow — meant for a single stem or a tight three-stem arrangement. Small ...
A vase with smooth drifting outer waves — like wind-blown dune crests wrapped around the body. The w...
The square-seat version of the splayed stool — legs cant outward from each corner of the square top....
The baseline storage bin — four straight walls glued to a base, no handles, no dividers. Used as the...
A multi-tier shoe rack with full-depth shelves made of parallel slats. The slats let air circulate a...
A stool with a hexagonal seat panel. The six-sided top has no obvious 'front' — it reads correctly f...
A stool with an oval seat and a wraparound apron rail directly under the seat. An oval is structural...
A pegboard tray: the perforated panel has shallow walls around its perimeter, turning it into a catc...
A square-bodied pen holder printed in one piece with subtle fluting along each of the four faces. Th...
A multi-tier plant shelf in CNC-milled timber, with shelf levels arranged at staggered heights so ta...
A single-piece printed comb with a built-in handle. The handle thickens slightly toward the grip end...
A tall shoe rack with four shelf levels of three slat bays each, framed by corner posts and front/re...
A hexagonal pegboard. Three or four hex boards tile cleanly into a honeycomb pattern, so the same pa...
A chair with an X-shaped cross brace between the rear legs, visible from behind. The cross brace tur...
A compact two-tier shoe rack made from just four CNC-cut panels — two side panels and two shelves, s...
A two-meter park bench in CNC-milled timber — long enough for three adults, supported by just two en...
A tall bar stool at counter height (seat ~750 mm) with four legs that splay slightly outward, a squa...
